Equinox Systems EQLED135, User Manual, Page: 8 / 12

www.prolight.co.uk MicroPar Bar System User Manual
8
Operating instructions
IR remote functions:
Button functions:
01 - Sets the unit into blackout on or off
02 - Sets the unit into DMX - Use the ‘+’ and ‘-’ DMX
buttons to change the DMX address (001-512)
03 - Puts the unit into static colour mode - Use the ‘+’
and ‘-’ color buttons to select the desired colour.
04 - Puts the unit into colour change mode - Use the ‘+’
and ‘-’ speed buttons to select the desired speed
05 - Puts the unit into colour fade mode - Use the ‘+’
and ‘-’ colour buttons to select the desired program,
and the ‘+’ and ‘-’ speed buttons to select the
desired program speed
06 - Puts the unit into sound active mode - Use the ‘+’
and ‘-’ colour buttons to select the desired program,
and the ‘+’ and ‘-’ sen buttons to select the
desired sensitivity level (1-4)
07 - Puts the unit into strobe mode - Use the ‘+’
and ‘-’ colour buttons to select the desired program,
and the ‘+’ and ‘-’ speed buttons to select the
desired strobe speed
08 - Puts the unit into auto mode - Use the ‘+’ and ‘-’
speed buttons to select the desired speed
09 - Puts the unit into colour chase mode - Use the ‘+’
and ‘-’ speed buttons to select the desired speed
10 - Sets the unit into DMX - Use the ‘+’ and ‘-’ DMX
buttons to change the DMX address (001-512)
11 - Sets the static colour/colour programs - Use the ‘+’
and ‘-’ buttons to change the desired colour/program
(note: only available in the static colour, colour fade,
sound active and strobe modes)
12 - Sets the program speed level - Use the ‘+’ and ‘-’
buttons to change the desired program speed level
(note: only available in the colour change, colour
fade, strobe, auto and colour chase modes)
Sets the sound sensitivity level - Use the ‘+’
and ‘-’ buttons to change the desired sound
sensitivity level (note: only available in sound
active mode)
DMX A1
A6 A7
A3
A5
A2 A4
–
+
SPEED
–
+
COLOR
–
+
DMX
–
+
SEN
01
07
03
09
04
06
05
02
08
11
10
12
13