functions without any changes press the MENU button again.
Led Display
Press the MENU button to select
. Press the ENTER button and the
display will blink. Use the DOWN and UP buttons to select the
(Led display on) or
(Led display off) mode. Once the mode has
been selected, press the ENTER button to confirm. To go back to the
functions without any changes press the MENU button again. Press and
hold the MENU button for one second or wait for one minute to go back to
the main menu.
Display Inversion
Press the MENU button to select
. Press the ENTER button to
change the mode
(display normal), it will be automatically saved
after 8 seconds. Press the ENTER button again to select the mode
(display inversion). To go back to the functions press the MENU button.
Press and hold the MENU button for one second or wait for one minute to
go back to the main menu.
Display normal mode is for floor standing the unit.
Display inversion mode is for hanging the unit upside down.
Pan Inversion
Press the MENU button to select
. Press the ENTER button and the
display will blink. Use the DOWN and UP buttons to select the
(normal) or
(pan inversion) mode. Once the mode has been
selected, press the ENTER button to confirm. To go back to the functions
without any changes press the MENU button again. Press and hold the
MENU button for one second or wait for one minute to go back to the
main menu.
Tilt Inversion
Press the MENU button to select
. Press the ENTER button and the
display will blink. Use the DOWN and UP buttons to select the
(normal) or
(tilt inversion) mode. Once the mode has been
selected, press the ENTER button to confirm. To go back to the functions
without any change press the MENU button again. Press and hold the
MENU button for one second or wait for one minute to go back to the
main menu.
Auto-Test
Press the MENU button to select
. Press the ENTER button and the
unit will run a self-test with its built-in programs. To go back to the
functions without any changes press the MENU button again. Press and
hold the MENU button for one second or wait for one minute to go back to
the main menu.
Software version
Press the MENU button up to when the
is blinking on the display.
Pressing ENTER button and the display will show the version of software of
the unit. To go back to the functions press the MENU button.
