Equinox Systems EQ-TD-4286, Owner'S Manual

Page: 27 / 37

26
MAINTENANCE
Battery
Your meter comes with one 1.5V AAA size alkaline battery.
Low Battery Signal
The meter will display one of the messages below to alert you when the
meter power is getting low.
The “ ” appears with E-b, Error and low:
The power is not enough to do a test. Please change the
batteries immediately.
Replacing the Battery
To replace the batteries, make sure that the meter is turned off.
1. Press the edge of the battery cover and lift it up to remove.
2. Remove the old battery and replace with one 1.5V AAA size alkaline
battery.
3. Close the battery cover. If the batteries are inserted correctly, you will
hear a “beep” afterwards.
NOTE:
• Replacing the battery does not affect the test results stored in the memory.
SET
SET SET