Display mode
In this mode you can flip the display over to match which way the unit is being used. To flip the
display, press the
“MENU”
button to show
“DISP”
on the display. Now press the
“ENTER”
button
to flip the display over and again to flip it back to its original position.
Test mode
In this mode you can test that all of the LEDs are illuminating. To do this, press the
“MENU”
button
to show
“TEST”
on the display. Now press the
“ENTER”
button to initiate the test. Once you are
happy with the test, press the
“ENTER”
button to stop it.
Hour mode (non re-settable)
In this mode you can check the total time the unit has been used for. To check the units time line,
press the
“MENU”
button to show
“HOUR”
on the display. Now press the
“ENTER”
button to dis-
play the units time usage. For example if the unit has been in use for 5 hours the display will show
“- - - 5”
. If the unit has been in use for 120 hours the display will show
“-120”
and so on.
Software version mode:
To show the Software version, press the
“MENU”
button to show
“VERS”
on the display. Now
press the
“ENTER”
button to display the units software version
“xxx”
.
Reset mode:
To reset the unit at any point, press the
“MENU”
button to show
“RSET”
on the display. Now
press the
“ENTER”
button to reset the initial start up procedure.
9 channel DMX chart:
Equinox Beamtastic
DMX Charts
12 channel DMX chart:
Summary of Contents for Beamtastic
Page 1: ...ORDER CODE EQLED56...
