Equflow 6010BCPM Pulse Input Batch Controller Instruction Manual
4
Table of Figures
Figure 1: 1/8 DIN Panel Mounting ................................ 9
Figure 2: Controller Dimensions - Side View ............ 10
Figure 3: Controller Dimensions - Top View ............. 10
Figure 4: Transmitter Supply Voltage Selection ....... 10
Figure 5: Connector Labeling for 6010BCPM ........... 11
Figure 6: Power Connections ..................................... 11
Figure 7: Flowmeter Powered by Internal Power
Supply .................................................................. 12
Figure 8: Flowmeter Powered by External Supply ... 12
Figure 9: Self-Powered Magnetic Pickup Coil
Flowmeter ............................................................ 12
Figure 10: NPN open Collector Input ......................... 12
Figure 11: PNP Sensor Powered by Internal Supply 12
Figure 12: Switch Input Connections ......................... 12
Figure 13: Relay Connections .................................... 12
Figure 14: AC and DC Loads Protection .................... 13
Figure 15: Low Voltage DC Loads Protection ........... 13
Figure 16: F4 Digital Input Connections .................... 13
Figure 17: Expansion Modules & DIN Rail Mounting
Kit .......................................................................... 14
Figure 18: Digital I/O Module Connections ................ 14
Figure 19: Interlock Connection ................................. 14
Introduction
The Equflow 6010BCPM is an easy-to-use batch controller ideal for simplifying independent batch
control operations where local control is preferred to expensive and expansive plant operation
systems.
The controller comes programmed for easy front panel start, pause, stop, and batch size (preset)
changes. The bottom display can be programmed to display rate, grand total, batch count, or
preset by cycling the Stop (F3) button. A digital input is standard.
Manual start batching is default, but automatic batching with a restart after a programmed time
delay from the completion of the last batch, is also possible.
Overrun correction adjusts the closing of the batch control relays to adjust for inaccuracies from
batch to batch. This increases accuracy over time as systems wear out. The overrun correction
feature is capable of compensating for inaccuracies of up to 10% of the programmed preset value.
Ordering Information
Model
Description
6010BCPM001XX
1/8 DIN Pulse Input Batch Controller with 2 Relays powered by 85-265 VAC
Accessories
Model
Description
60101002
DIN rail mounting kit for two expansion modules
60101044
4 digital inputs & 4 digital outputs (2 may be connected)
60101232
RS-232 serial adapter
60101485
RS-485 serial adapter
60107485-I
RS-232 to RS-422/485 isolated converter
60108232-N
USB to RS-232 non-isolated converter
60108485-I
USB to RS-422/485 isolated converter
