Equflow 6010BCPM001XX, Instruction Manual

Page: 38 / 50

Equflow 6010BCPM Pulse Input Batch Controller Instruction Manual
38
Reset Menu (
reset
)
The Reset menu is used to reset the total, grand totals, batch count, maximum, or minimum reading
(peak or valley) reached by the process; both maximum and minimum may be reset at the same time by
selecting “reset high & low” (
rst HL
).
Control Menu (
Contrl
)
The Control menu is used to control the relays manually, ignoring the input. Each relay can be
programmed independently for manual control. Selecting automatic control sets all relays and analog
output for automatic operation.
Setting Up the Password ( pass )
The Password menu is used for programming three levels of security to prevent unauthorized changes to
the programmed parameter settings and to program the non-resettable totalizer.
Pass 1: Allows use of function keys and digital inputs
Pass 2: Allows use of function keys, digital inputs and editing set/reset points
Pass 3: Restricts all programming, function keys, and digital inputs.
Total Password: Prevents resetting the total manually
Gtotal Password: Prevents resetting the grand total manually
Protecting or Locking the Controller
Enter the Password menu and program a six-digit password.
For instructions on how to program numeric values see Setting Numeric Values , page 22.
Once Manual mode is initiated on any rela y,
an LED labeled “M” is turned on.
Every few seconds, all LEDs representing
outputs that are in Manual mode, as well as
the “M” LED flash.
This process will continue
as long as any output is in manual mode.