Accessaries
Data sheet
★ Indoor device：135×76×17mm
★ Outdoor device：60×60×15.5mm
★ Hole size：12mm ～ 58mm
③
④
★ Door thickness：35mm ～ 105mm
【Remarks】Door thickness 35mm~65mm, please choose
35mm screws. Door size 65mm~95mm, please choose 65mm
screws. Door thickness over 95mm, please choose approx.
①
②
80mm M3 screws.
⑤
⑥
★ Working Voltage: DC 3.5V ～ 5V
Instructions
Camera
Detector
Time
Date
Records
Settings
Readme
Infrared
Doorbell
LCD
OK Preview
Left
Right
Switch on or off/back
Power
Outdoor part
Indoor part
Indoor device UI
◆
Main menu:
Calendar/Clock, Records, Settings, Readme. Please click these four buttons:
◆
Records
:
the software will auto create folders by the system time and date and the visitors
’ image/video will be auto named and stored by the
system time and date, which easy for your checking.The Records format is [A/M] Y/M/D
– H/M/S, A means auto detection and photo shooting/video
recording, M means manually record image/video. For example[M]20121101-162956.jpg, means it is a manual recording at 16:29:56 on November
1,2012.
◆
Charge:
the device uses rechargeable lithium battery, the battery
mark will be red when it’ s in low battery, meanwhile, the monitor LED will flash
regular(1 time per 3 seconds), please charge timely under this condition. Two optional charge ways: Charge by USB cable connected with monitor
USB interface and Charge by charger.
Notes:
If you choose to charge by charger, please reset the system time after installing the battery.
◆
LED:
While someone at your door, the doorbell LED will flash or light on(Optional), meanwhile, the monitor LED will light on. When no one there,
the LED will auto light off within several seconds. The LED will be in breathing in normal condition.
◆
Preview:
Press Preview button into preview interface, press Left and Right to zoom the outdoor scene.
◆
Settings:
Time&Date:
Press
to set time and date, then press
Back button
to complete the settings.
Record Mode:
image or video, details as follows:
☆ Image（640×480）
：【Default】
☆ Image（320×240）
☆ Video（3 seconds）
☆ Video（5 seconds）
☆ Video（10 seconds）
：【not recommended for energy-saving】
Intelligent Detection
:
6
Detection Settings
:
◎ 1 seconds
◎ 3 seconds
◎ 5 seconds
◎ 15 seconds
◎ Off：
6
Alarm Settings:
◎ 20 seconds
◎ 30 seconds
◎ Off
6
Detection Sensitivity
◎ Low
◎ Middle
◎ High
I
Notes
I
For energy-saving and long standby, please do not
choose high mode.
Doorbell Answering:
while someone ring the doorbell, the
monitor LED auto light on(Default), or manually light on(Optional).
Back light control:
LCD auto light off time is 5 seconds (Default).
Memory card format
Factory Default
◆
Records:
Press the doorbell button, the monitor will shoot
image or record video (optional), meanwhile, play music and
display the outdoor scene.
◆
Readme:
Installation Guide, System Information and Contacts
◆
Delete image/video:
records→files→image/video, to Press OK
button long time, it will show Delete?, to Press OK to delete,
to Press Back to cancel.