ok
Product Components and Software Usage Instructions
Indoor Screen
Outdoor Camera
Main Interface
Display Screen
Affirmation
Button (OK)
Left
Arrow
Preview
Button
Power/
Back Button
Right
Arrow
Surveillance Camera
Infrared Light
Doorbell Push Button
Software Interface Instructions
How To Use
Time Display
Visitor Record
System Settings
Battery Charge Level Display
User Guide
Date Display
Indoor Unit User Interface
Doorbell Answer Mode:
The default setting is for the screen
to automatically illuminate when someone presses the
doorbell button; to conserve electricity, manual screen
illumination mode can be selected.
Doorbell Volume:
Adjustable to 6 levels.
Charging Method:
This product uses a rechargeable lithium
battery. When the battery charge level is low, the battery
indicator will change to red, indicating empty; under these
circumstances, begin charging immediately. To charge
through the USB cable, connect to the charging port at the
bottom of the indoor screen.
Video Preview:
Press the video preview button to enter the
preview screen, where the left and right arrow buttons can
be used to scale the view outside the door. Pressing the left
button will shrink the person’s image, and increase the view
angle; pressing the right button will enlarge the person’s
image, and decrease the view angle.
System Settings
Time and Date:
Within the system settings, the “OK”, “Left”,
“Right”, and “Power/Back” buttons can be used to control
time and date settings; note that once the settings have been
completed, the “Power/Back” button must be pressed to
save and exit.
Recording Mode:
Recording mode is divided into two modes,
photo and video, and more specifically divided into the
following conditions:
Picture (640 x 480): Large image storage mode (default mode)
Picture (320 x 240): Small image storage mode
Video (3 second): Video recording time of 3 seconds
Video (5 second): Video recording time of 5 seconds
Video (10 second): Video recording time of 10 seconds
Note: Memory card must be inserted for video recording
Picture and Video Brightness
Low: Suitable under normal circumstances
High: Suitable when backlighting is present
Automatic Deletion
Turn On: When free space is low, the earliest recorded
photographs will be automatically deleted.
Turn Off: When free space is low, the earliest recorded
photographs will not be automatically deleted, and there will
be a reminder that memory card space is low.
Visitors:
When the exterior doorbell is pressed, the indoor
screen will automatically take a picture (or video,
depending on user-defined settings), while at the same
time broadcasting the bell sound and displaying the
outside scene on the display screen.
CONTACT INFO
ADDRESS:
2100 Geng Road, Suite 210,
Palo Alto, CA 94303, USA
CUSTOMER SERVICE EMAIL:
WEBSITE:
www.equeshome.com
Main Menu Overview:
Calendar and clock display,
visitor record, system settings, and user guide can be
controlled by pressing the following four buttons, “OK”,
“Left”, “Right”, “Power/Back”.
Visitor Record:
The software will automatically establish a
folder for that day according to the system time, and will
automatically provide a name based on the system time,
so that the host can conveniently look back on past visits.
The Visitor Record formatting is as follows:
“Year Month Day - Hour Minute Second”, for example:
“[M]20170401-102956.jpg”, representing the image of a
visitor who pressed the doorbell button on
April 1st, 2017, at 10:29.56.
Note:
During times that the MicroSD card is not inserted,
this device can store at most 10 photos in its internal
memory, and when the automatic deletion function is
enabled, the earliest taken photos will be automatically
deleted by the system when storage space is low; once
the memory card is inserted, any stored images will be
automatically transferred onto the memory card.
User Guide:
Contains system information as well as our
contact information.
Actively Observe Outside Circumstances:
The Preview
button on the main unit can be pressed directly to display
the outside scene on the indoor screen; if a picture of
the outside is desired, press the Preview button once
more, and the photograph will be automatically saved.
Delete Pictures:
Enter the Visitor Record
→
navigate to
folder for the date of interest
→
move selection to the
photograph that will be deleted;
There are two ways for deletion:
*Briefly press the “OK” button, enter the image preview,
press the “OK” button again, and the screen will prompt
for confirmation of delete action; press the “OK” button once
more to delete, or press the “Power/Back” button to cancel.
*Hold down the “OK” button, do not enter the image preview,
and the screen will prompt for confirmation of delete action;
press the “OK” button once more to delete, or press the
“Power/Back” button to cancel.
Delete Video:
Enter the Visitor Record
→
navigate to
folder for the date of interest
→
move selection to the
video that will be deleted, hold down the “OK” button, and
the screen will prompt for confirmation of delete action;
press the “OK” button once more to delete, or press cancel.
Infrared Night Vision:
Option to turn on/turn off the infrared
night vision function.
Display Screen Brightness:
Adjustable to 5 levels
Backlight Time Control:
The default time when the screen
automatically turns off is 5 seconds.
Memory Card Format:
To delete content from the memory
card, this function can be selected to format the memory card.
Restore to Factory Settings:
If the system becomes
confusing or is displaying abnormally, it can be restored to
factory settings.