Equator Super Combo 4400, Owner'S Manual

Page: 20 / 26

How to Run a Wash Cycle
Turn the dial to align with one of the 14 programs depending on the laundry, then press the
START/PAUSE button to run the selected wash program.
How to Run a Wash Cycle and Dry Cycle
Turn the dial to select one of the 14 wash programs depending on the laundry, then press either the
Sensor Dry button, or Time Dry button.
If a Time Dry cycle is selected, press this button again, to select the desired dry duration.
Then press START/PAUSE button to run both the wash and dry programs.
If a Sensor Dry cycle is selected, one of four dry levels can be selected by pressing the Dry level
button. Then press START/PAUSE button to run both the wash and dry programs.
How to Run a Dry Cycle only
Make sure the wash program dial is in the OFF position. Press the Sensor Dry button OR Time Dry
button.
If a Time Dry cycle is selected, press this button again to select the desired dry duration.
If a Sensor Dry cycle is selected, one of four dry levels can be selected by pressing the Dry Level
button.
Then press START/PAUSE button to start the dry cycle.
The indicator light and the display will show the selected program.
Pressing the start button will lock the door and The wash cycle will start, until the whole
program is completed. The door will be locked and cannot be opened untill 2 minutes after the wash
cycle ends. Please do not try to force the door open.
Breaking the door handle is not covered by
warranty.
In the drying cycles, the door can be opened when the symbol displays on the screen.