Equator RF 1000 Owner'S Manual Download

Page: 7 / 12

Electrical Connection

Warning

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged,
have it replaced by an Equator Authorized Service Agent.

This unit should be properly grounded for your safety. The power cord of this unit is equipped with three-
prong plug which mates with standard three prong wall outlets to minimize tile possibility electrical
shock.

Do not under any circumstances cut or remove the third ground prong from the power cord supplied.

Use of extension cords is not recommended.

This unit requires a standard 115/120-volt, 60Hz electrical outlet with three-prong ground.

To prevent accidental injury, the cord should be secured behind the refrigerator-freezer and not left
exposed or dangling.

Reversing the Door Swing of Your Refrigerator-Freezer

This

refrigerator-freezer has the capability of the door opening from either the left or right side. The

unit is delivered to you with the door opening from the left side. Should you desire to reverse the
opening direction, please call service for reversal instructions.

OPERATING YOUR REFRIGERATOR-FREEZER

Freezer Temperature Control

Refrigerator Temperature Control

Setting the Temperature Control

To control the internal temperature, adjust the control dial according to the ambient temperature

purpose of use.

The first time you turn the unit on, set the temperature control to “MAX” on both controls.

The range of the temperature control is from position “MIN” (the warmest) to “MAX” (the
coldest). After 24 to 48 hours, adjust the temperature control to the setting that best suits your
needs. The setting of “3” should be appropriate for home or office refrigerator use.

NOTE:

IF THE UNIT IS UNPLUGGED, LOSES POWER, OR TURNED OFF; YOU
MUST WAIT 3 TO 5 MINUTES BEFORE RESTARTING THE UNIT. IF YOU
ATTEMPT TO RESTART

BEFORE THIS TIME DELAY, THE

REFRIGERATOR-FREEZER WILL NOT START.