4
Check the plug and cable before connecting the power and
ensure it is 110 voltage.
Rotate the Fan Speed Knob from the 0 (Off) position to either
low or high cool setting.
The Cooling Air Hose can be rotated 360 degrees, allowing for
maximum flexibility in positioning the flow and direction of cool air.
Press the Power Button to turn the OAC on.
After turning off the OAC, wait 5 minutes before turning it on
again. It cannot be turned on immediately.
The OAC is equipped with overheat and overload protection for
the compressor. If the compressor overheats because of voltage
fluctuations or high ambient temperature, the compressor power
supply shuts off and the OAC will blow only ambient air.
Power Button
Fan Speed Knob
Operation
In the course of operating the OAC, condensate water is
produced. The water can either be collected in the Water Tank
or can be discharged directly outdoors through a Drainage Hose
included with the unit.
Water Tank and Drainage Hose
Water Tank
The Water Tank is located at the bottom of the OAC. It is
important to empty the tank in a timely manner. Check the
water level every 2-3 days.
Turn the power off before emptying the Water Tank.
