F.
CABINET ITEMS
1.
Magnetic catches 111 are a push-fit in front top panel 109.
2.
To remove front top panel 109, remove both sliding tabletops completely (see A.1.) and magnetic catches
111. Drill out the rivet at each end of the front slide panel using a 3mm bit. Use extreme care when drilling
Withdraw leg top caps 108, and then remove the front top panel assembly. Refit in reverse order.
3.
Castor wheels 116 are a push-fit onto castor wheel inserts 117. The castor wheel inserts are a push-fit into
the cabinet. Remove by prising out with care.
THEORETICAL WIRING DIAGRAM
SPECIFICATION
Voltage
120 V ac. 60Hz
Loading
410 W (Top 110 W, Middle 110 W, Bottom 190 W)
Cord length
2 m
Pre-heat time
30 minutes approx
Finish
See text
Dimensions (approx)
725mm W x 380mm D x 695mm H
SERVICE INFORMATION
The elements used in this appliance are of the adhesive variety and cannot be removed easily. For this reason,
elements and plates are supplied as complete assemblies.
4
