![background image](http://html1.mh-extra.com/html/equation/3276000286066/3276000286066_legal-and-safety-instructions_2420627050.webp)
can pre-set. To increase the pre-set temperature, press Switch and 28°C is the highest
temperature you can pre-set.
• Press key to quit temperature setting, and the temperature that you have set will be
effect at once.
• If the temperature is ≤ -10 , then it will show “LO”. If t he temperature is over 40 ,then it
will show “HI".
SWING
• Press “SWING” Switch on the top panel control when the heater is on, the heater will
swing from left to right with the LED indicating Press it again, swing will stop.
TIMER
• In working condition, press key, the time indicator will be on and the machine
enter into time setting mode.
• When the figure for countdown time flashes on the LED, you can now adjust the countdown
time by pressing Switch to increase the value and pressing Switch to decrease the
value. For example, if you set the countdown time for 1 hour, your heater will turn off
automatically in 1 hour. The maximum allow for countdown setting is 12 hours.
• Press key to quit timer setting, and timer that you have set will effect at once.
• If there is no operation to the keys after 5 seconds or press other keys except , and
then the LED indicator will show the timer that you have set. It will decrease 1h per time, if
the timer turns to value 0, then the device will turn off at once, and enter into standby
mode.
• Press key, the timer setting is finished, and enter into temperature setting.
• You can also use the remote control to activate the differente controls.
• To stop the heater, push again the
ON/OFF
switch
• Unplug the product when it’s not in use
INDOOR USE ONLY
A tip-over switch is located under the base of the heater: it will disconnect the heater
automatically if it falls on the ground.
,
EN
49