PS Series 3000 QuickStart
Step 1. Set Up the Array Hardware
3
Step 1. Set Up the Array Hardware
A. Unpack Shipping Box and Gather Hardware
The order in which you unpack the shipping box is important for safety:
1. Open the outer shipping box and remove the accessory box.
2. Remove the accessories and ensure that you have the contents shown in the
.
3. Following the unpacking instructions in the shipping box, lift the array and
place it on a flat surface that is protected from electrostatic discharge. Do not
remove the plastic bag from the array until you are ready to install it in a rack.
4. Gather the hardware that is not included in the box, as described in the table
Required Hardware – Not Supplied
.
Shipping Box Contents
The array is
heavy
. Do not attempt to lift or install the array without
assistance.
