OPERATOR INSTRUCTION MANUAL
IM_TFA_REV03_A4
TFA15TI
FLANGE ALIGNMENT TOOL
6
3.6
CYLINDER ADJUSTMENT SLEEVE
The Alignment Piston has a 65mm stroke. The Cylinder
Adjusment Sleeve extends the reach of the tool to fit a
variety of flange sizes, without comprimising its maximum
alignment capacity.
Turn the Cylinder Adjustment Sleeve by the knurled ring
until the Alignment Foot is touching the lower flange.
3.4
ADJUSTMENT LEG
Extend the Adjustment Leg by turning the knurled foot
clockwise until it contacts the pipe wall. Ensure that the
tool is sitting squarely.
3.5
WING EXTENSION
The Alignment Piston is located on an adjustable wing
which can be extended to enable the tool to be used on a
variety of flange sizes.
Use the Wing Extension adjustment knob to lower the
wing until the foot of the Alignment piston is positioned
within the space between the upper and lower faces of
the lower flange.
