eqss Skyjack SJIII OverWatch 6253, Installation Manual, Page: 16 / 19

EQUIPMENT SAFETY SYSTEMS
75 Naxos Way, Keysborough 3173 Victoria Australia
P: +61 3 8770 6555 E: support@eqss.com.au
Skyjack SJIII DC Scissor
Plug and Play
Installation Manual
REV 1.2 07/10/2020 Model6253 OverWatch ™ Installation Manual Document # DO001246
| 16 of 19 |
System Settings
Default Settings
See the sections below for details on each of the Skyjack SJIII OverWatch™ system default settings.
Setting Name Description Default
deltaseek This specifies which of the previous lidar reading to
compare against the current one to calculate the speed.
20
max_safe_velocity This is the velocity threshold for the cutout in cm/s. for
drive mode.
90
max_safe_displacement This is the maximum permitted distance in cm the operator
may be away from the calibration position in drive mode.
40
max_safe_velocity_elevate This is the velocity threshold for the cutout in cm/s. in
elevate mode.
70
max_safe_displacement_elevate This is the maximum permitted distance in cm the operator
may be away from the calibration position in elevate mode.
40
max_safe_velocity_neutral This is the velocity threshold for the cutout in cm/s. in
neutral mode.
60
max_safe_displacement_neutral This is the maximum permitted distance in cm the operator
may be away from the calibration position in neutral mode.
40
fwddispadj The coefficient to apply to the displacement when the
displacement is toward the sensor.
-0.6
fwdveladj The coefficient to apply to the velocity when the
displacement is toward the sensor.
-1.0
zone_obstruction If the lidar sensor reading is below this, the lidar is
considered to be obstructed (with paint or thick coat of
dust) and the system is cutout until the obstruction is
cleared.
5
zone_minimum Any lidar reading below this will trigger a cutout with the
message: “Operator Zone”
15
zone_maximum Any lidar reading above this will trigger a cutout with the
message: “Operator Zone”
120
horn_count_max The number of times the horn will sound when alerting the
operator if the deadman remains pressed during the
cutout.
2
horn_time_ms The amount of time in milliseconds each individual horn
should play.
200
adc_elevate_threshold For the elevate ADC input, a reading above this indicates
the EWP is in elevate mode.
2200
adc_drive_threshold For the drive ADC input, a reading above this indicates the
EWP is in drive mode.
2200