12
3. PC software
The PC software for the USB programming stick can be
downloaded from www.eQ 3.de. The corresponding file
can be found in the “Technical documentation” area.
To start the download directly, type the following URL into
the address line of your browser:
www.eQ-3.de/Downloads/Software/heating controller.zip
Follow the on-screen instructions when downloading the
PC software.
4. Radio transmission of programming settings
So that the USB programming stick can send data to sys-
tem components such as radio energy-saving control-
lers, these components must first of all be set to teach-
in mode.
The USB programming stick must be plugged into the
•
PC’s USB port.
The PC software must be running on the PC and
•
programming must be complete.
For transmission, the receivermust be set to teach-in
•
mode. For more information on this, refer to the opera-
ting manual for the relevant device.
The USB programming stick can now send data to
•
the devices that are ready to receive. To start the
transmission process, activate the transmission
function in the PC software.
The USB programming stick does not remain permanently
taught–in on the devices to be programmed.
