Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.3.x)
18
Memory Status
The
Memory Status
page includes tables with the
available
User Space
information for each extension.
These tables display the space used by the voice
mailbox and uploaded/recorded system greetings. It
shows the free and total space (counted
in
minutes/seconds) for every extension. This page
includes the following information:
Memory Size
shows
total memory space (counted in
minutes/seconds) available on the Quadro and assigned
to all extensions.
The table’s links lead the administrator to the extension
settings page where
User Space
may be altered.
The
System Memory
row indicates the space occupied
by the universal extension recordings. Link refers to the
Upload Universal Extension Recordings
universal extension system messages may be uploaded.
Call Statistics
shows the
current number of calls with
recorded statistic entries.
Fig. II-24: Memory Status page
Hardware Status
The
Hardware Status
table displays a list of the
hardware devices present and currently available on the
Quadro board. The hardware device version number and
additional comments about its state are indicated here.
Fig. II-25: Hardware Status page
SIP Registration Status
The
SIP Registration Status
table includes the following information that may be sorted in ascending or descending order clicking the columns'
headlines:
•
Extension
- the two-digit number of the extensions on the Quadro. The extension numbers are created as links that lead to the page
– General Settings where the details about the SIP registration of the correspondent extension can be found. This
column also lists SIP registrations of the SLA lines. The links on the SLA line number leads to the Key System Emulation page for the
configuration details.
•
Reg. Name
- the registration name used on the SIP server.
•
Server
- the name of the SIP server, where the correspondent extension is registered.
•
Registered
- this column has to display the value Yes. Not registered extension can't be part of this table.
•
Registration Time
- time of registration. The values in this column will be refreshed automatically from time to time.
The links inside the table will link you to the
page where the SIP registration settings may be altered.
The
Detected Connection Type
field displays the connection type Quadro currently is acting in (direct connection or behind NAT). If Quadro is
acting behind NAT, the NAT machine IP address is also displayed.
