Epson XP-5150 Series, User Manual

Page: 37 / 204

Message on the Network Environment
Message Solution
*Multiple network names (SSID) that
match your entered network name (SSID)
have been detected. Confirm network
name (SSID). The same SSID may be set on several access points. Check the settings on the
access points, and change the SSID.
The Wi-Fi environment needs to be
improved. Turn the wireless router off and
then turn it on. If the connection does not
improve, see the documentation for the
wireless router. After moving the printer closer to the access point and removing any
obstacles between them, turn off the access point. Wait for about 10 seconds,
and then turn it on. If it still does not connect, see the documentation
supplied with the access point.
*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one. You can simultaneously connect up to four computers and smart devices in
Wi-Fi Direct (Simple AP) connection. To add another computer or smart
device, disconnect one of the connected devices first.
Printing a Network Status Sheet
You can check the detailed network information by printing it.
1.
Load papers.
2.
Select Settings .
To select an item, move the focus to the item using the
u d l r
buttons, and then press the OK button.
3.
Select Network Settings > Network Status .
4.
Select
Print Status Sheet
.
5.
Check the message, and then print the network status sheet.
6.
Press the OK button.
Replacing or Adding New Access Points
If the SSID changes due to the replacement of an access point, or an access point is added and a new network
environment is established, re-set the Wi-Fi settings.
Related Information
&
“Changing the Connection Method to a Computer” on page 37
Changing the Connection Method to a Computer
Using the installer and re-set up in a different connection method.
Network Settings
>
Changing the Connection Method to a Computer
37