Solving Problems
Решение проблем
Вирішення проблем
تلاكشلما لح
تلاکشم لح
Error Messages
Solution
Paper jam.
Paper out. Load paper.
Load some paper. Otherwise, make sure the number of sheets does not
exceed the limit specified for the type of media you are using.
Communication error. Connect computer.
Make sure the computer is connected correctly. If the error message
still appears, make sure that scanning software is installed on your
computer and that the software settings are correct.
Printer error. Turn power off and on again.
Turn the printer off and then back on. Make sure that no paper is still in
the printer. If the error message still appears, contact Epson support.
A printer’s ink pad is nearing the end of its service life.
Please contact Epson Support.
Press
x
to resume printing. The message will be displayed until the ink
pad is replaced. Contact Epson support to replace ink pads before the
end of their service life. When the ink pads are saturated, the printer
stops and Epson support is required to continue printing.
A printer’s ink pad is at the end of its service life. Please
contact Epson Support.
Contact Epson support to replace ink pads.
Operation canceled. No memory card recognized.
Make sure the memory card has been inserted correctly. If it is inserted
correctly, check to see if there is a problem with the card and try again.
Combination of IP address and subnet mask is invalid. See
documentation.
See the online Network Guide.
Recovery Mode
The firmware update has failed. You will need to re-attempt the
firmware update. Ready a USB cable and visit your local Epson website
for further instructions.
Error Messages
Сообщения об
ошибках
Повідомлення про
помилки
أطلخا لئاسر
اطخ یاهمایپ
EN
EN
RU
UK
AR
FA