![Epson XP-3200 Series User Manual Download Page 162](http://html.mh-extra.com/html/epson/xp-3200-series/xp-3200-series_user-manual_2418982162.webp)
Starting the utility
Select
System Preferences
from the Apple menu >
Printers & Scanners
(or
Print & Scan
,
Print & Fax
), and then
select the printer. Click
Options & Supplies
>
Utility
>
Open Printer Utility
.
Application for Configuring Printer Operations (Web Config)
Web Config is an application that runs in a web browser, such as Internet Explorer and Safari, on a computer or
smart device. You can confirm the printer status or change the network service and printer settings. To use the
Web Config, connect the printer and the computer or device to the same network.
The following browsers are supported.
Microsoft Edge, Internet Explorer 8 or later, Firefox
*
, Chrome
*
, Safari
*
*
Use the latest version.
Note:
The initial value of the Web Config administrator password is the serial number of the printer. Check the label attached to
the printer.
The label attachment position depends on the product; it may be on the back, the open side of the cover, or the bottom.
Running Web Config on a Web Browser
1.
Check the printer's IP address.
Select
Settings
>
Network Settings
>
Connection Check
from the control panel to start the connection check.
Press the
x
button or the OK button to print the network connection report. Check the printer's IP address
on the printed network connection report.
2.
Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
Using the smart device, you can also run Web Config from the product information screen of the Epson Smart Panel.
Since the printer uses a self-signed certificate when accessing HTTPS, a warning is displayed on the browser
when you start Web Config; this does not indicate a problem and can be safely ignored.
Application for Updating Software and Firmware (Epson Software
Updater)
Epson Software Updater is an application that installs new software, and updates firmware over the Internet. If you
want to check for update information regularly, you can set the interval for checking for updates in Epson Software
Updater's Auto Update Settings.
>
>
Application for Updating Software and Firmware (Epson Softwar
162
Summary of Contents for XP-3200 Series
