When you finish scanning, make sure the access light on the drive is not flashing, then remove or
disconnect it from the product.
Caution:
Do not remove the USB thumb drive or cable when the access light is flashing, or you may lose
data on the drive.
Parent topic:
Related references
External USB Device Specifications
Starting a Scan
After placing your original documents or photos in your product for scanning, start scanning using one of
these methods.
Starting a Scan Using the Product Control Panel
Starting a Scan Using the EPSON Scan Icon
Starting a Scan from a Scanning Program
Parent topic:
Starting a Scan Using the Product Control Panel
You can scan an image to your computer or to a USB device using your product's control panel buttons.
Your product automatically selects suitable default scan settings, but you can view or change them as
necessary.
1.
Make sure you installed the product software and connected the product to your computer or
network.
Note:
With Mac OS X 10.6/10.7, you must connect your product with a USB cable to scan using the
buttons.
2.
Press the
Scan
button.
The scan options are displayed:
99
Summary of Contents for WorkForce Pro WP-4520
