3.
Select
Confirm Wi-Fi/Network Settings
or
Confirm Network Settings
and press the
OK
button.
4.
Press either of the
Start
buttons to print the network status sheet.
(Press the
Stop/Reset
button if you want to cancel the operation.)
Examine the settings shown on the network status sheet to diagnose any problems you have.
Parent topic:
Solving Copying Problems
Check these solutions if you have problems copying with your product.
Product Makes Noise, But Nothing Copies
Product Makes Noise When It Sits for a While
Parent topic:
Product Makes Noise, But Nothing Copies
If your product makes a noise, but nothing copies, try these solutions:
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• If the nozzle check page does not print, but the product's light is on, make sure your product software
is installed correctly.
• Make sure your product is level (not tilted).
Parent topic:
235
Summary of Contents for WorkForce Pro WP-4520
