Epson WorkForce Pro WF-C879R User Manual Download

Page: 418 / 576

Environmental Specifications

Operation

Use the printer within the range shown in the following graph.

Temperature: 10 to 35°C (50 to 95°F)

Humidity: 20 to 80% RH (without condensation)

Storage

Temperature: -20 to 40°C (-4 to 104°F)

Humidity: 5 to 85% RH (without condensation)

You can store for one month at 40°C (104°F).

Environmental Specifications for Ink Supply Units

Storage Temperature

-30 to 40 °C (-22 to 104 °F)

Freezing Temperature

-20 °C (-4 °F)

Ink thaws and is usable after approximately 5 hours at 25 °C (77 °F).

You can store for one month at 40 °C (104 °F).

Installation Location and Space

To ensure safe use, place the printer in a location that meets the following conditions.

❏

A flat, stable surface that can support the weight of the printer

❏

Locations that do not block or cover the vents and openings in the printer

❏

Locations where you can load paper and remove paper easily

❏

Locations that meet the conditions in the "Environmental Specifications" in this manual

Product Information

Product Specifications

Installation Location and Space

418

Summary of Contents for WorkForce Pro WF-C879R

































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WorkForce Pro WF-C879R

Reviews:

Related manuals for WorkForce Pro WF-C879R

Brands by name

Popular brands

Epson WorkForce Pro WF-C879R, User Manual

Search results

Summary of Contents for WorkForce Pro WF-C879R

Reviews:

Related manuals for WorkForce Pro WF-C879R

Brands by name

Popular brands