Epson WorkForce Pro WF-C879R User Manual Download Page 175

Page: 175 / 576

Follow the on-screen instructions to print an alignment pattern.

Follow the on-screen instructions to align the ruled lines. Find and enter the number for the pattern that has
the least misaligned vertical line.

Cleaning the Paper Path for Ink Smears

When the printouts are smeared or scuffed, clean the roller inside.

Important:

Do not use tissue paper to clean the inside of the printer. The print head nozzles may be clogged with lint.

Load A3-size plain paper in the paper source that you want to clean.

Select

Settings

on the home screen.

Select

Maintenance

Paper Guide Cleaning

Select the paper source, and then follow the on-screen instructions to clean the paper path.

Note:

Repeat this procedure until the paper is not smeared with ink. If the printouts are still smeared, clean the other paper
sources.

Cleaning the Scanner Glass

When the copies or scanned images are smeared, clean the scanner glass.

Caution:

Be careful not to trap your hand or fingers when opening or closing the document cover. Otherwise you may be
injured.

Important:

Never use alcohol or thinner to clean the printer. These chemicals can damage the printer.

Maintaining the Printer

Improving Print, Copy, Scan, and Fax Quality

Cleaning the Scanner Glass

175

Summary of Contents for WorkForce Pro WF-C879R

































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WorkForce Pro WF-C879R

Reviews:

Epson WorkForce Pro WF-C879R, User Manual, Page: 175 / 576

Search results

Summary of Contents for WorkForce Pro WF-C879R

Reviews: