Epson WorkForce 840 Quick Manual Download

Page: 53 / 64

Where to Get Help

Where to Get Help

Epson Technical Support

Internet Support

Visit Epson’s support website at

epson.com/support

(U.S.) or

epson.ca/support

(Canada) and select your product for solutions to common problems. You can
download drivers and documentation, get FAQs and troubleshooting advice, or
e-mail Epson with your questions.

Speak to a Support Representative

Before you call Epson for support, please have the following information ready:

■

Product name (WorkForce 840 Series)

■

Product serial number (located on the label in back)

■

Proof of purchase (such as a store receipt) and date of purchase

■

Computer configuration and description of the problem

Then call:

■

U.S.: (562) 276-4382, 6

– 8

, Pacific Time, Monday through Friday,

and 7

– 4

Saturday

■

Canada: (905) 709-3839, 6

– 6

, Pacific Time, Monday through Friday

Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.

Purchase Supplies and Accessories

You can purchase genuine Epson ink and paper at Epson Supplies Central at

www.epson.com/ink3

(U.S. sales) or

www.epson.ca

(Canadian sales). You can

also purchase supplies from an Epson authorized reseller. To find the nearest one,
call 800-GO-EPSON (800-463-7766).

Other Software Technical Support

ABBYY

FineReader

Phone: (408) 457-9777

www.abbyyusa.com
[email protected]

Summary of Contents for WorkForce 840

































































Search results

Summary of Contents for WorkForce 840

Reviews:

Related manuals for WorkForce 840

Brands by name

Popular brands

Epson WorkForce 840, Quick Manual

Search results

Summary of Contents for WorkForce 840

Reviews:

Related manuals for WorkForce 840

Brands by name

Popular brands