Epson WN6501CEP, Quick Installation Manual, Page: 5 / 30

C
OMPLIANCES
v
The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is
not visible when the module is installed inside another device, then the outside of the device
into which the module is installed must also display a label referring to the enclosed module.
This exterior label can use wording such as the following: “Contains Transmitter Module
FCC ID: BKMWN6501C” or “Contains FCC ID: BKMWN6501C.” Any similar wording
that expresses the same meaning may be used. The Grantee may either provide such a label,
an example of which must be included in the application for equipment authorization, or,
must provide adequate instructions along with the module which explain this requirement. In
the latter case, a copy of these instructions must be included in the application for equipment
authorization.
DGT WARNING
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變
更頻率、加大功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，
應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干
擾。
Article 14
Without permission, any company, firm or user shall not alter the frequency, increase the
power, or change the characteristics and functions of the original design of the certified lower
power frequency electric machinery.
Article 15
The application of lower power frequency electric machineries shall not affect the navigation
safety nor interfere a legal communication, if an interference is found, the service will be
suspended until improvement is made and the interference no longer exists.
The foregoing legal communication refers to the wireless telecommunication operated
according to the telecommunications laws and regulations. The lower power frequency
electric machinery should be able to tolerate the interference of the electric wave radiation
electric machineries and equipments for legal communications or industrial and scientific
applications.