Remote control special requirements
1) When Bluetooth is connected, the remote controller sends the Bluetooth key value; if Bluetooth is not
connected, the infrared key value is sent.
2）Indicator light: red, the indicator light flashes each time the button is pressed.
Low voltage reminder: When the battery is low, the indicator light flashes quickly. As long as it is still running, it
will remain flashing, and when it is no longer operated by the remote control, it will flash 5 times or flash for 3
seconds, then stop and go out.
3）Support Bluetooth remote online upgrade, and trigger upgrade through HOST.
4）Pairing method:
a）Press the “OK” + “VOL-” button for 3 seconds at the same time, the indicator light flashes. If the pairing is
successful, the indicator will turn off after 3 seconds.
b）If the pairing is not successful, be sure to still press the OK + VOL- button to continue sending paired
broadcast pairings.
c）Click the OK + VOL- button to successfully match. Do not clear the pairing and then pair again. After
successful pairing, the pairing broadcast cannot be sent until the next button is pressed. Connection interval
<12ms
5）Remote control distance：≥10m
6）Bluetooth device name：
EPSON ATV REMOTE
Remote control other requirements
1）Pairing function requirements: Do not scan Bluetooth devices or pairing (including short time) to press the
pairing button continuously, please confirm 50 times to ensure no problem;
2）Reconnection function requirements: There must be no problem with the connection, including the power
failure of the box and the remote control is broken. Electric back, stand still for 2 hours, please verify 50 times
to ensure no problem;
3）Anti-interference function requirements: There must be no problem affecting the host WIFI throughput.
Please ensure that the WIFI throughput of the host is normal when the remote control is connected evenly;
4）Performance requirements: required to support ≤ 10m, there must be no voice calls, lost and remote control
key jams, lost code or key connection issues;
5）Power requirements: The remote control can last for at least 6 months.
Voice: 16 KHz voice sample, 16-bit sample, short press voice button (color button).
To start recording, the remote control stops recording after receiving a stop recording command from the
voice engine. Voice timeout 30 seconds protection, forced to exit recording.
The box software can control the MIC to turn on and off.
Support remote control MIC and other MIC (such as the recording button apk on the phone) alternately,
switch the word input.