Protocol
Description
WSD Settings
You can enable or disable the WSD function. When this is enabled, you can add WSD devices,
and print from the WSD port.
LLTD Settings
You can enable or disable the LLTD function. When this is enabled, it is displayed on the
Windows network map.
LLMNR Settings
You can enable or disable the LLMNR function. When this is enabled, you can use name
resolution without NetBIOS even if you cannot use DNS.
LPR Settings
You can specify whether or not to allow LPR printing. When this is enabled, you can print from
the LPR port.
RAW(Port9100) Settings
You can specify whether or not to allow printing from the RAW port (Port 9100). When this is
enabled, you can print from the RAW port (Port 9100).
RAW(Custom Port) Settings
You can specify whether or not to allow printing from the RAW port (custom port). When this
is enabled, you can print from the RAW port (custom port).
IPP Settings
You can specify whether or not to allow printing from IPP. When this is enabled, you can print
over the Internet.
FTP Settings
You can specify whether or not to allow FTP printing. When this is enabled, you can print over
an FTP server.
SNMPv1/v2c Settings
You can specify whether or not to enable SNMPv1/v2c. This is used to set up devices,
monitoring, and so on.
SNMPv3 Settings
You can specify whether or not to enable SNMPv3. This is used to set up encrypted devices,
monitoring, etc.
Related Information
&
“Controlling protocols” on page 558
&
“Protocol Setting Items” on page 559
Protocol Setting Items
Bonjour Settings
Items
Setting value and Description
Use Bonjour
Select this to search for or use devices through Bonjour.
Bonjour Name
Displays the Bonjour name.
Bonjour Service Name
Displays the Bonjour service name.
Location
Displays the Bonjour location name.
Top Priority Protocol
Select the top priority protocol for Bonjour print.
Wide-Area Bonjour
Set whether to use Wide-Area Bonjour.
SLP Settings
>
>
559
