164
Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
1.
Make sure plain paper is loaded in Cassette 1.
2.
Press the up or down arrow buttons, select
Menu
, and press the
OK
button.
3.
Press the down arrow button, select
Maintenance
, and press the
OK
button.
4.
Press the down arrow button, select
Print Head Cleaning
, and press the
OK
button.
You see this screen:
5.
Press the up arrow button.
Note:
Use the nozzle check pattern to determine which colors need cleaning. You can save ink by
cleaning only selected colors.
When the cleaning cycle is finished, you see a message on the screen.
Caution:
Never turn off the product during a cleaning cycle or you may damage it.
6.
Select
Print Nozzle Check Pattern
and press the
OK
button.
7.
Press the up arrow button.
8.
Press the down arrow button, select
Finish
, and press the
OK
button to confirm that the print head is
clean.
If you don’t see any improvement after cleaning the print head up to 4 times, leave the product turned on
and wait at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of
the ink cartridges may be old or damaged and needs to be replaced.
Parent topic:
Summary of Contents for WF-5190
Page 1: ...WF 5190 User s Guide ...
Page 2: ......
Page 10: ......
Page 51: ...51 Parent topic Enabling Epson Universal Print Driver PCL or PostScript Printing ...