Epson WF-3820 Series, User Manual

Page: 227 / 378

An Image of the Reverse Side of the Original Appears in the Sent Fax
The following causes can be considered.
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
&
“Placing Originals” on page 33
The density setting is high when sending faxes.
Solutions
Select Fax > Fax Settings > Scan Settings > Density , and then lower the setting.
Received Fax Quality is Poor
The Image Quality of Received Faxes is Poor
The following causes can be considered.
ECM setting is disabled.
Solutions
Select
Settings
>
General Settings
>
Fax Settings
>
Basic Settings
and enable the
ECM
setting on the
control panel. This may clear errors that occur due to connection problems. Note that the speed of
sending and receiving faxes may be slower than when
ECM is disabled.
The image quality setting is low on the sender's fax machine.
Solutions
Ask the sender to send faxes at a higher quality.
Solving Problems
>
Printing, Copying, Scanning, and Faxing Quality is Poor
>
Received Fax Quality is Poor
227