manualshive.com logo in svg

Epson WF-3820 Series, User Manual

The Epson WF-3820 Series user manual is essential for getting the most out of your printer. Discover step-by-step instructions, troubleshooting tips, and valuable insights in this comprehensive manual. It is available for free download at manualshive.com, ensuring you have all the necessary information to optimize your printing experience.

Share
Download
background image

❏

This printer uses ink cartridges equipped with a green chip that monitors information such as the amount of
remaining ink for each cartridge. This means that even if the cartridge is removed from the printer before it is
expended, you can still use the cartridge after reinserting it back into the printer. However, when reinserting a
cartridge, some ink may be consumed to guarantee printer performance.

❏

For maximum ink efficiency, only remove an ink cartridge when you are ready to replace it. Ink cartridges with
low ink status may not be used when reinserted.

❏

To ensure you receive premium print quality and to help protect your print head, a variable ink safety reserve
remains in the cartridge when your printer indicates to replace the cartridge. The yields quoted for you do not
include this reserve.

❏

Do not disassemble or remodel the ink cartridge, otherwise you may not be able to print normally.

❏

You cannot use the cartridges that came with the printer for the replacement.

Ink consumption

❏

To maintain optimum print head performance, some ink is consumed from all cartridges during maintenance
operations. Ink may also be consumed when you replace ink cartridge or turn the printer on.

❏

When printing in monochrome or grayscale, color inks instead of black ink may be used depending on the
paper type or print quality settings. This is because a mixture of color inks is used to create black.

❏

The ink in the ink cartridges supplied with your printer is partly used during initial setup. In order to produce
high quality printouts, the print head in your printer will be fully charged with ink. This one-off process
consumes a quantity of ink and therefore these cartridges may print fewer pages compared to subsequent ink
cartridges.

❏

Quoted yields may vary depending on the images that you are printing, the paper type that you are using, the
frequency of your prints and environmental conditions such as temperature.

Replacing Ink Cartridges

When a message is displayed prompting you to replace the ink cartridges, select 

How To

 and then view the

animations displayed on the control panel to learn how to replace the ink cartridges.

If you need to replace the ink cartridges before they are expended, select 

Maintenance

 > 

Ink Cartridge

Replacement

 on the home screen, and then follow the on-screen instructions. Select 

How To

 for details.

!

Caution:

Be careful not to trap your hand or fingers when opening or closing the scanner unit. Otherwise you may be injured.

Related Information

&

“Ink Cartridge Codes” on page 262

&

“Ink Cartridge Handling Precautions” on page 199

Continue Printing Temporarily without Replacing Ink Cartridges

Temporarily Printing with Black Ink

When color ink is expended and black ink still remains, you can use the following settings to continue printing for
a short time using only black ink.

Solving Problems

>

It is Time to Replace the Ink Cartridges

>

Continue Printing Temporarily without Replacing In

…

201

Summary of Contents for WF-3820 Series



























































































































































































































































































































































































Reviews:

No comments

Related manuals for WF-3820 Series

Canon IMAGEPRESS C7010VPS Brochure & Specs preview
IMAGEPRESS C7010VPS
Brand: Canon Pages: 4
Canon iP2600 - PIXMA Color Inkjet Printer Setup Instructions preview
iP2600 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon FAXPHONE L80 Setup Instructions preview
FAXPHONE L80
Brand: Canon Pages: 8
Canon ImageCLASS 2300 Network Manual preview
ImageCLASS 2300
Brand: Canon Pages: 102
Canon MultiPASS L6000 User Manual preview
MultiPASS L6000
Brand: Canon Pages: 251
Canon MultiPASS C5500 Quick Start Manual preview
MultiPASS C5500
Brand: Canon Pages: 24
Canon MultiPASS L6000 Quick Start Manual preview
MultiPASS L6000
Brand: Canon Pages: 24
Canon Laser Class 700 Series Reference Manual preview
Laser Class 700 Series
Brand: Canon Pages: 221
Panasonic KX-MC6040 - Color Laser Multi-Function... Quick Reference Manual preview
KX-MC6040 - Color Laser Multi-Function...
Brand: Panasonic Pages: 24
Oki C610cdn Brochure & Specs preview
C610cdn
Brand: Oki Pages: 4
Canon PIXMA TR4720 Online Manual preview
PIXMA TR4720
Brand: Canon Pages: 542
SEH UT 16 Quick Installation Manual preview
UT 16
Brand: SEH Pages: 20
Xerox WorkCentre 7655 Evaluator Manual preview
WorkCentre 7655
Brand: Xerox Pages: 24
Tally XPRESS T9412i Network User'S Manual preview
XPRESS T9412i
Brand: Tally Pages: 76
Oce TDS860 User Manual preview
TDS860
Brand: Oce Pages: 330
Velleman 3DPEN1 User Manual preview
3DPEN1
Brand: Velleman Pages: 44
Oki C9600 Series Disassembly & Reassembly Procedures preview
C9600 Series
Brand: Oki Pages: 45
Kyocera FS-2100D Quick Installation Manual preview
FS-2100D
Brand: Kyocera Pages: 24

Brands by name

Popular brands

Load more brands