Cleaning the Printer
If the printer’s outer case is dirty or dusty, turn off the printer and clean it with a soft, clean, and moist cloth. If you
cannot remove the dirt, try cleaning with a soft, clean, and moist cloth moistened with a mild detergent.
c
Important:
❏
Be careful not to get water onto the printer mechanism or any electrical components. Otherwise, the printer
could be damaged.
❏
Never use alcohol or paint thinner to cleanthe components and the case. These chemicals can damage them.
Saving Power
The printer enters sleep mode or turns off automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will affect the product's energy efficiency. Please
consider the environment before making any change.
Depending on the location of purchase, the printer may have a feature that turns it off automatically if it is not
connected to the network for 30 minutes.
Saving Power (Control Panel)
1.
Select
Settings
on the home screen.
2.
Select
General Settings
>
Basic Settings
.
3.
Do one of the following.
Note:
Your product may have the
Power Off Settings
or
Power Off Timer
feature depending on the location of purchase.
❏
Select
Sleep Timer
or
Power Off Settings
>
Power Off If Inactive
or
Power Off If Disconnected
, and then
make settings.
❏
Select
Sleep Timer
or
Power Off Timer
, and then make settings.
>
>
134
Summary of Contents for WF-3820 Series
Page 16: ...Part Names and Functions Front 17 Inside 18 Rear 19 ...
Page 27: ...Loading Paper Paper Handling Precautions 28 Paper Size and Type Settings 28 Loading Paper 30 ...
Page 32: ...Placing Originals Placing Originals 33 Originals that are not Supported by the ADF 34 ...
Page 375: ...Where to Get Help Technical Support Web Site 376 Contacting Epson Support 376 ...