background image

System reset

When an abnormal display appears, reset the built-in integrated circuit.

(1) Pull the crown out to the 2nd click position.

(2) Press the buttons A and B at the same time for longer than 2 seconds.

(3) Push the crown back to the normal position.

Summary of Contents for VS75A

Page 1: ...s the button B repeatedly to set it to the 0 position 3 Set the stopwatch 1 5 second hand Press the button A for 2 seconds Press the button B repeatedly to set it to the 0 position 4 Push the crown back to the normal position The stopwatch minute hand turns a full round and can now be set to the correct position The stopwatch 1 5 second hand turns a full round and can now be set to the correct pos...

Page 2: ... prevent function is operated to prevent the secondary battery deterioration and breakage When the energy stored in the secondary battery is reduced to an extremely low level the small second hand starts moving at two second intervals instead of the normal one second intervals In that case recharge the watch as soon as possible by exposing it to light Otherwise the watch may stop operating in abou...

Page 3: ...in 1 5 second increments When the measurement reaches 60 minutes the stopwatch automatically stops counting How to use stopwatch function The stopwatch 1 5 second hand is capable of timing 60 minutes 60 seconds x 60 times The stopwatch minute hand is capable of timing 60 minutes Before using the stopwatch be sure to check that the crown is set at the normal position and that the stopwatch hands ar...

Page 4: ...bnormal display appears reset the built in integrated circuit 1 Pull the crown out to the 2nd click position 2 Press the buttons A and B at the same time for longer than 2 seconds 3 Push the crown back to the normal position ...

Reviews: