Epson VS400 User Manual Download

Page: 61 / 121

Locking the Projector's Buttons

You can lock the buttons on the projector's control panel to prevent anyone from using the projector. You
can lock all the buttons or all the buttons except the power button.

Press the Menu button, select the Settings menu, and press Enter.

Select the Control Panel Lock setting and press Enter.

Select one of these lock types and press Enter:

• To lock all of the projector's buttons, select Full Lock.

• To lock all buttons except the power button, select Partial Lock.

You see a confirmation prompt.

Select Yes and press Enter.

Unlocking the Projector's Buttons

Parent topic:

Projector Security Features

Unlocking the Projector's Buttons

If the projector's buttons have been locked, hold the Enter button on the projector's control panel for
seven seconds to unlock them.

Parent topic:

Locking the Projector's Buttons

Summary of Contents for VS400


























































































































Search results

Summary of Contents for VS400

Reviews:

Related manuals for VS400

Brands by name

Popular brands

Epson VS400, User Manual

Search results

Summary of Contents for VS400

Reviews:

Related manuals for VS400

Brands by name

Popular brands