Epson V11H944820, User Manual

Page: 28 / 336

28
Setting Up the Projector
Follow the instructions in these sections to set up your projector for use.
Projector Placement
Projector Connections
Attaching and Removing a Lens
Securing the Power Cord
Attaching and Removing the HDMI Cable Clip
Installing Batteries in the Remote Control
Projector Placement
You can place the projector on almost any flat surface to project an image.
You can also install the projector in a ceiling mount if you want to use it in a fixed location.
Warning: Note the following points when installing on a ceiling with a ceiling mount or in a high location.
If installation work is not carried out correctly, the projector could fall down. This may result in injury or
accidents.
• Since special techniques are required to install the projector on a ceiling and to handle the ceiling
mount, make sure you contact a professional.
• Secure the mount with bolts using the handle securing section (6 points) on the top or base of the
projector.
• To prevent the projector from falling, thread sufficiently strong wire rope and so on through the ceiling
mount and secure to the ceiling.
Keep these considerations in mind as you select a projector location:
• Place the projector on a sturdy, level surface or install it using a compatible mount.
• Install the projector at any angle. There is no vertical or horizontal limit to how the projector can be
installed.
• Leave plenty of space around and under the projector for ventilation as described here, and do not
place it on top of or next to anything that could block the vents.
• Place the projector parallel to the screen.
• Position the projector within reach of a grounded electrical outlet or extension cord.