Epson UB-E04 Reference Manual Download Page 29 | Manualshive

Page: 29 / 43

background image

29

Chapter 3 Application Development Information

3

Application Development Information

Controlling the Printer

UB-E04 supports ePOS-Print XML. Users can control the printer with ePOS-Print XML, in addition to ESC/
POS which is supported by the printer.

ePOS-Print XML

ePOS-Print XML is the Epson original control command system for POS printers defined in XML. With
ePOS-Print XML commands, you can print in environments where http communication is available and
from OS applications. For detailed information about ePOS-Print XML, see the ePOS-Print XML User's
Manual.

Software

The following software is provided for application development.

Development Kit

Utilities

To use ePOS-Print XML or SDK for JavaScript, set ePOS-Print to Enable in EpsonNet Config
(Web Version) beforehand. For details about EpsonNet Config (Web Version),

see

"EpsonNet Config (Web version)" on page 23.

Manual

Description

ePOS-Print SDK

This is a developer kit to control applications, native applications for smart
devices, and printers. This includes libraries, manuals, and sample programs.

for Android

for iOS

for Windows Store Apps

for JavaScript

Software

Description

Operating environments

EpsonNet Config

This is a network configuration tool for
Epson network products.

Windows, Mac

«
...
27
28
29
30
31
...
»

Summary of Contents for UB-E04












































Reviews:

No comments

Related manuals for UB-E04

Brand: IEI Technology Pages: 3

Brand: Edge-Core Pages: 7

Brand: Lanner Pages: 109

Brand: Nakayo Pages: 119

Brand: LevelOne Pages: 3

Brand: Supermicro Pages: 131

Brand: Baikal Miner Pages: 14

Brand: ADS Technologies Pages: 21

Brand: Accusys Pages: 12

Brand: DataDirect Networks Pages: 97

StudioStation 100

Brand: Extron electronics Pages: 4

Brand: Nedap Pages: 3

Brand: Cisco Pages: 122

Brand: Korg Pages: 81

Brand: Mitsubishi Electric Pages: 6

Brand: Mitsubishi Electric Pages: 21

Apricot HP DDS DRIVES

Brand: Mitsubishi Electric Pages: 13

Brand: Mitsubishi Electric Pages: 224

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands