29
Chapter 2 Setup
2
Connecting External Devices
If you connect external devices, turn off the product and then connect each cable to the port/connector on the
back of the product.
When connecting the cables whose connectors do not lock themselves (USB cables and line-out cable), pass the
cables through the wire saddle to prevent them from coming off.
Key Input Device
Connect the key input device to a USB port. For how to set barcode scanners and so on, see the respective prod-
uct manuals.
•
Systems that use TM-DT software
Set the device ID, control script and so on with EPSON TMNet WebConfig. For details, see
service settings - Key input device" on page 84
•
PC-POS System
Since it is recognized as a HID device, setting is not required.
Serial Communication Device
Connect the serial communication device to a serial port. For how to set the device, install the driver and so on,
see the respective product manuals.
•
Systems that use TM-DT software
Align communication conditions between EPSON TMNet WebConfig and the device.
Set the device ID, communication conditions, control script and so on with EPSON TMNet WebConfig. For
details, see
"Settings - Web Service settings - Serial communication Device" on page 85
.
•
PC-POS System
Align communication conditions between this product and the device.
Fix the USB cables with wire saddles to prevent detachment.
Wire saddle
