Epson TM-T88V-DT Technical Reference Manual Download Page 126

Page: 126 / 240

126

Turn on the product, and "Press any key to boot from CD or DVD" is

displayed. Press any key.

The system starts using the recovery disk. When a message that says "Do

you want to recover?" is displayed. Click [Yes].

A confirmation message that says "All data on disc will be deleted. Do

you really want to start recovery?" is displayed. Click [Yes].

Recovery is performed. The "***INSTALL COMPLETED***" message is

displayed. After that, the "Press any key to continue..." message is

displayed. Press any key.

The "Shutdown..." message is displayed and the system shuts down.

Remove the DVD drive from the product's USB connector.

Turn on the product. Windows settings are performed automatically.

The product restarts automatically and the Windows log-in screen is

displayed. Enter the password and log in.

Select [Start]-[Control Panel]-[Date and Time], and the [Date and Time

menu] is displayed. Set the date, time, and time zone.

Turn off the product. Then remove the DVD drive.

The initial password is "T88V-DT".

Even if the mouse cursor is displayed on the log-in screen, because the mouse and
keyboard must be identified again, it may take about a minute before you can use
them.

Summary of Contents for TM-T88V-DT

















































































































































































































































Search results

Summary of Contents for TM-T88V-DT

Reviews:

Related manuals for TM-T88V-DT

Brands by name

Popular brands

Epson TM-T88V-DT, Technical Reference Manual

Search results

Summary of Contents for TM-T88V-DT

Reviews:

Related manuals for TM-T88V-DT

Brands by name

Popular brands