Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET
NEXT
103 102
TM-T88
III
series
Specification
(STANDARD)
B
ESC c 3
n
[Name]
Select paper sensor(s) to output paper end signals
[Format] ASCII ESC c 3
n
Hex 1B 63
33
n
Decimal 27
99 51
n
[Range] 0
≤
n
≤
255
[Description] Selects the paper sensor(s) to output paper end signals
•
Each bit of
n
is used as follows:
Bit Off/On
Hex Decimal Function
0
Off
00
0
Paper roll near-end sensor disabled
On
01
1
Paper roll near-end sensor enabled
1
Off
00
0
Paper roll near-end sensor disabled
On
02
2
Paper roll near-end sensor enabled
2
Off
00
0
Paper roll end sensor disabled
On
04
4
Paper roll end sensor enabled
3
Off
00
0
Paper roll end sensor disabled
On
08
8
Paper roll end sensor enabled
4-7
- -
- Undefined
[Details]
•
It is possible to select multiple sensors to output signals. Then, if any of the sensors detects
a paper end, the paper end signal is output.
•
The command is available only with a parallel interface and is ignored with a serial interface.
•
Sensor is switched when executing this command. The paper end signal switching be
delayed depending on the receive buffer state.
•
If either bit 0 or bit 1 is on, the paper roll near-end sensor is selected as the paper sensor
outputting paper-end signals
•
If either bit 2 or bit 3 is on, the paper roll end sensor is selected as the paper sensor
outputting paper-end signals.
•
When all the sensors are disabled, the paper end signal always outputs a paper present
status.
[Default]
n
= 15
