Epson TM-T88 ReStick, Operator'S Manual

Page: 49 / 79

Commands 5-3
[Description] Transmits the selected printer status specified by n in real time, according
to the following parameters:
n = 1: Transmit printer status
n = 2: Transmit off-line status
n = 3: Transmit error status
n = 4: Transmit paper roll sensor status
DLE ENQ n
[Name] Real-time request to printer
[Format] ASCII DLE ENQ n
Hex 10 05 n
Decimal 16 5 n
[Range] 1
≤
n
≤
2
[Description] Responds to a request from the host computer. n specifies the request as
follows:
ESC FF
[Name] Print data in page mode
[Format] ASCII ESC FF
Hex 1B 0C
Decimal 27 12
[Description] In page mode, prints all buffered data in the printing area collectively.
ESC SP n
[Name] Set right-side character spacing
[Format] ASCII ESC SP n
Hex 1B 20 n
Decimal 27 32 n
[Range] 0
≤
n
≤
255
[Description] Sets the character spacing for the right side of the character to [n
×
horizontal or vertical motion units].
n Request
1 Recover from an error and restart printing from the line where the error occurred
2 Recover from an error after clearing the receive and print buffers