Epson TM-T70II-DT2 User Manual Download Page 5

Page: 5 / 36

English

Part Names and Functions

Roll paper cover

Open this cover to install/replace the roll paper.

Manual cutter

Use this cutter when you cut the roll paper manually.

Cutter cover

Open this cover to unlock the autocutter blade when the roll paper cover does not open due to a
paper jam. (

“The roll paper cover will not open” on page 27

)

Printer reset button

Keep pressing this button with a pointed object (such as a pen) until the

(Power) LED goes off to

reset the printer.

Power button

Press this button to turn on or shut down the product. Keep pressing the button to turn off the
product forcibly. (

“Forced Termination” on page 22

)

Note:

If the power button is disabled by settings on the operating system, the product will not shut down
even if you press the power button.

Cover open button

Press this button to open the roll paper cover.

Cutter cover

Controller LEDs

Connector cover

Roll paper cover

Printer reset
button

Feed button

Printer LEDs

Manual cutter

Cover open button

Power button

Summary of Contents for TM-T70II-DT2





































Search results

Summary of Contents for TM-T70II-DT2

Reviews:

Related manuals for TM-T70II-DT2

Brands by name

Popular brands

Epson TM-T70II-DT2, User Manual

Search results

Summary of Contents for TM-T70II-DT2

Reviews:

Related manuals for TM-T70II-DT2

Brands by name

Popular brands