Epson TM-T60, Operator'S Manual

Page: 57 / 85

waits for the paper feed switch to be
pressed.
After the paper feed switch is pressed,
the printer executes the macro once.
The printer repeats this operation n1 times.
• If this command is received while defining the macro, the
macro definition is aborted, and the definition is cleared.
• If the macro is not defined or if n1 is 0, nothing is executed.
• Paper cannot be fed with the paper feed switch while
executing the macro when n3 is 1.
Not defined.
GS :
ESC = n
Select device
< 1B >
H
< 3D >
H
< n >
0 n
255
Selects a device to receive data from the host computer.
- If the printer is not selected, the TM-T60P ignores all
received data until it is selected by this command.
- Each bit of
n
is used as follows:
Bit Function
Value
0
I
1
0 Printetr
Invalid Valid
1 Undefined
2
Undefined
3 Undefined
4 Undefined
5 Undefined
6 Undefined
7
Undefined
• Even when the printer is not selected, it may enter
the BUSY state due to printer operation.
n = 1
- 5 0 -