54
Customize Value Setting Mode
You can confirm and set the printer's memory switches and customized values.
Follow the steps below.
1
After running a self-test, hold down the Feed button for at least one second to enter
the Mode selection.
The Mode selection guidance is printed, and the Paper LED flashes.
2
Briefly press the Feed button three times (less than one second), hold it down for at
least one second to enter the Software settings mode (Customized value setting).
The Software setting mode guidance is printed, and the Paper LED flashes.
Item
Confirm
Set
Autocutter
✔
✔
Auto line feed
✔
✔
Paper width
✔
✔
Command execution during offline
✔
✔
LED indicator when I/F starting
✔
✔
Printer Model Setting Information
✔
-
For details on the memory switches and customized values, see
"Software Settings" on page 39
Settings for Printer Model Setting Information are specified by using the "TM-J7200/TM-J7700
Printer Model Setting Utility". See
.
Customize Value Settings
Modes
0: Exit
1: Print Current Settings
2: Autocutter
3: Auto Line Feed
4: Paper Width
5: Other Settings
Select Modes by executing following
procedure.
step 1. Press the Feed button less
than 1 second as many times
as the selected mode number.
step 2. Press Feed button for 1
second or more.
