Epson SureLab D800 Series Operation Manual Download Page 48

Page: 48 / 108

Replacing Ink Cartridges

Caution:

❏

Do not disassemble ink cartridges.
If disassembled, ink could get in your eyes or adhere to your skin.

❏

Do not shake the ink cartridges too

vigorously; this can cause them to leak

❏

Keep ink cartridges out of the reach of children and do not drink the ink.

❏

If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them

immediately with water. If ink gets into your mouth, spit it out and see a doctor right away.

Important:

❏

See the following points when working with ink cartridges.

“Notes on Ink Cartridges” on page 21

❏

If you do not have a new ink cartridge for installation, leave the expended ink cartridge in the printer until

the new one is ready. If the printer is left without the ink cartridges, it may malfunction.

❏

When an ink cartridge is running low, replace it with a new ink cartridge as soon as possible

❏

Do not leave the printer without ink cartridges installed. The inks inside the printer may dry and you may

not be able to print. When you are not using the printer, make sure there is an ink cartridge installed in each

slot.

Checking Ink Levels

Checking from the Printer

The ink lights on the front of the printer light up when the corresponding ink cartridge is low.

See

“Front” on page 6

Ink light

Replacing Ink Cartridges

Summary of Contents for SureLab D800 Series













































































































Search results

Summary of Contents for SureLab D800 Series

Reviews:

Related manuals for SureLab D800 Series

Brands by name

Popular brands

Epson SureLab D800 Series, Operation Manual

Search results

Summary of Contents for SureLab D800 Series

Reviews:

Related manuals for SureLab D800 Series

Brands by name

Popular brands