Epson SureColor T3475 User Manual Download Page 116

Page: 116 / 226

116

Using Your Printer as a Copier

You can connect a supported Epson scanner to your printer and print out enlarged scans on roll paper.

The following Epson scanners are supported:

• DS-530

• DS-7500

• DS-70000

Note:

Visit the Epson website for the most updated list of supported scanners.

Connecting a Scanner to Your Printer
Placing Originals in the Scanner
Printing Enlarged Copies from the Scanner

Connecting a Scanner to Your Printer

You can connect a supported scanner directly to the printer to print out enlarged copies.

Turn off the printer and the scanner.

Summary of Contents for SureColor T3475



































































































































































































































Search results

Summary of Contents for SureColor T3475

Reviews:

Related manuals for SureColor T3475

Brands by name

Popular brands

Epson SureColor T3475, User Manual

Search results

Summary of Contents for SureColor T3475

Reviews:

Related manuals for SureColor T3475

Brands by name

Popular brands