Status ID
IEEE802.1X Status
EAP Failure
Authentication has failed since there are the following errors in the printer
settings.
❏
If
EAP Type
is
EAP-TLS
or
PEAP-TLS
, client certificate is incorrect or has
certain problems.
❏
If
EAP Type
is
EAP-TTLS
or
PEAP/MSCHAPv2
, user ID or password is not
correct.
Solving Problems for Advanced Security
Restoring the Security Settings
When you establish a highly secure environment such as IPsec/IP Filtering or IEEE802.1X, you may not be able to
communicate with devices because of incorrect settings or trouble with the device or server. In this case, restore
the security settings in order to make settings for the device again or to allow you temporary use.
Disabling the Security Function Using the Control Panel
You can disable IPsec/IP Filtering or IEEE802.1X using the printer's control panel.
1.
Select Menu >
General Settings
>
Network Settings
.
2.
Select
Advanced
.
3.
Select from the following items that you want to disable.
❏
Disable IPsec/IP Filtering
❏
Disable IEEE802.1X
4.
Select
Proceed
on the confirmation screen.
5.
When a completion message is displayed, select
Close
.
The screen automatically closes after a specific length of time if you do not select
Close
.
Problems Using Network Security Features
Forgot a Pre–shared Key
Re-configure a pre-shared key.
To change the key, access Web Config and select the
Network Security
tab >
IPsec/IP Filtering
>
Basic
>
Default
Policy
or
Group Policy
.
When you change the pre-shared key, configure the pre-shared key for computers.
Administrator's Guide
Advanced Security Settings for Enterprise
103
