Understanding the Display
A
Messages
Displays the printer's status, operation, and error
messages.
U
“When a Message is Displayed” on page 107
B
Heater temperature
The thermometer icons give a rough indication of
the current temperatures of the heaters.
: The heater has reached the selected
temperature.
: The heater has not reached the selected
temperature.
C
Feed adjustment information during printing
This information is displayed when the adjustment
value is specified during printing.
U
“Correcting Banding” on page 51
D
Media info
This shows information related to the media, as
shown below.
:
This is the setting number for the media
that is selected.
:
The values for the platen gap are
indicated by their positions on the
icon, as shown below.
: 1.6,
: 2.0,
: 2.5
:
This is the width of the media that is
loaded.
/
:
When
: The remaining amount of
media (length of the remaining roll
media) is displayed in increments of 0.1
m.
When
: The print length per job is
displayed in increments of 1 m.
Change displays via
Screen Display
in
the settings menu.
If you set
Length
in
Media Remaining
to
Off
, the remaining media is not
displayed.
U
E
Estimated amount of ink and chip unit status
The estimated amount of ink and the status of the
chip unit that is mounted on the printer are dis‐
played.
The display changes, as shown below, if a warning or
error occurs.
Normal
During a warning
or error
or
1 Status indicators
The status of the chip unit and the indicators that
estimate and display the amount of ink is shown
as follows.
:
It is estimated that there is enough
ink in the ink tank to print with no
problems.
The number of indicator levels
decreases according to the estimated
amount of ink.
SC-F9300 Series User's Guide
Introduction
14
