Using the Control Panel Menu
152
Details of the Menu
Items or values marked with a superscript “1” apply to the S70670 and S50670, while items
marked with a superscript “2” are available with the S50670 only. Items marked with a
superscript “3” are not supported on the S70670.
The Media Setup Menu
The Media Setup menu can be accessed directly by pressing the
M
button.
indicates default settings.
Media Remaining
Select Media
Item
Parameter
Explanation
Remaining Setup
On
Choose
On
to display and record, or
Off
to not display and not record,
the amount of media remaining.
Length
,
Remaining Alert
, and
Remaining Length
options are available when
On
is selected. The
display panel shows the amount of media remaining based on the value
selected for
Length
and the amount of media used during printing.
Off
Length
5.0 to 99.5 m (15 to
300 ft)
Enter a value for overall roll length between 5.0 and 99.5 m (15 to 300 ft).
You can set in 0.5m (1ft) increments.
Remaining Alert
1 to 15 m (4 to 50
ft)
An alert will be displayed if the amount of media remaining reaches this
length. Choose from values between 1 and 15 m (4 and 50 ft). You can set
in 0.5m (1ft) increments.
Print Remaining Length
Use
Print Remaining Length
to print the amount of media remaining
on the current roll before replacing it with another type of media. You
can then enter this number as the media length the next time the roll is
used.
Parameter
Explanation
RIP Settings
Choose the media settings used for printing.
If
RIP Settings
is selected, the media settings selected in the software RIP
will be used.
Select a number between 1 and 30 to use the settings in the
corresponding media setting bank. Use
Customize Settings
to create
media setting banks.
1 to 30 (media setting bank number)
