78
Cutting Roll Paper
The printer has a built-in cutter that can automatically cut most paper types or you can cut your prints
manually. When Auto Cut is turned on, paper is automatically cut after each page prints, or if the roll
paper leading edge is not straight.
To switch between automatic or manual cutting methods, select
>
General Settings
>
Printer
Settings
>
Paper Source Settings
>
Roll Paper Setup
>
Cut Settings
>
Auto Cut
on the control panel
or adjust the auto cut settings in the printer driver. The setting selected in the printer driver overrides the
control panel setting.
Caution:
Do not use the built-in cutter with these paper types or you may damage or dull the blade:
• Fine art paper
• Canvas
• Vinyl
• Matte poster board
• Adhesive paper
• Banner media
When you print on these paper types, you need to disable the Auto Cut setting and cut the print
manually. You can print cutting guidelines to help you.
Cutting Roll Paper Manually
Printing Cutting Guidelines
Parent topic:
Related references
Related tasks
Selecting Advanced Settings - Mac
Removing the Auto Take-up Media
Cutting Roll Paper Manually
You can disable the Auto Cut option to keep your prints on the roll until you manually cut them using the
built-in cutter.
Summary of Contents for SureColor P8570D Series
